I Need More Information

Our team will be in touch as soon as possible to discuss your needs.

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

Universal Primer

Acrylic Emulsion Based Concentrated Primer
ACRYLIC EMULSION BASED CONCENTRATE PRIMER, water-based, one component, transparent, suitable using for inner and outer surfaces is a universal primer.

FEATURES

It penetrates the surface very well. By preparing a strong surface, it connects the top coat paint to the surface, reduces the paint consumption and reduces the water absorbency of the plasters. It is a primer that also has a high adhesion performance in water-based waterproofing materials and wall putty applications.

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL) : 1,00 ± 0,10
pH (25°C) : 7.0 – 9.0
Viscosity (25°C, mPa.s) : 8000 – 10000
Solid content (% Weight) : 50 ± 2
Water transmission rate (kg/ m2. h0,5) : < 0,1 CLASS W3
Adhesion strength by pull-off test (N/mm2) : Crack bridging flexible systems without trafficking ≥ 0.8, with trafficking ≥ 1.5 N/mm²
Permeability to water vapour (m) : 5 ≤  SD ≤ 50 CLASS II
Solvent : Water
Documents of the ProductDOCUMENTS OF THE PRODUCT

CE Certificate
ISO Certificate

122-ОР-06-2020 The decision that the products are not subject to the requirements of the “Technical Regulation on Fire Safety Requirements”

ISONEM Universal Pimer Certificate of State Registration of Products (SGR)

· Concrete, aerated concrete, plaster, and similar raw walls,
· Old lime whitewashed, emulsion-based old interior and exterior painted surfaces are used.

Surface preparation: Before application, swollen, loose and unhealthy looking surfaces should be scrapped, oil and dirt should be wiped off with water. If the salt release continues on the surface, the application should not be carried out until the causes are eliminated.

Application method: ISONEM UNIVERSAL PRIMER R is mixed thoroughly until it is homogenous before use, and diluted with water 7 times by volume. It is impregnated to the surface by brush or roller as a single layer. It should wait for a primer drying time minimum of 4 hours for the topcoat paint or insulation product application and it should be done in 4-24 hours.

COLOR: Transparent

CONSUMPTION: 100 – 200 g/m² (diluted, variable according to the absorbency of the surface.)

PAINTABLE (COVERAGE) AREA:
1 kg: 5 – 10 m²/1 bucket,
5 kg: 25 – 50 m²/1 bucket,
10 kg: 50-100 m²/1 bucket,
15 kg: 75 – 150 m²/1 bucket

PACKING: 1 kg, 5 kg, 10 kg and 15 kg PP Buckets.

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITIONS: Store tightly closed in a dry and cool place.