I Need More Information

Our team will be in touch as soon as possible to discuss your needs.

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

Pool

Polyurethane Based, 2 Components Pool Paint

Polyurethane Based, Two-component Pool Paint, it is the swimming pool paint which is polyurethane resin based, consisting of two components, blue in color. It is not affected by water and water pressure. ISONEM POOL is particularly very ideal to use in swimming pools, newly made decorative pools in the cases where the ceramic covering will not use. It gives a homogeneous blue appearance on the surface applied. It is elastic, not crack, it is not affected by the UV lights and the swimming pool chemicals. The product has high resistance against alkali and chloride. Its color does not fade in time, not destroyed underwater, abrasion-proofing. The workmanship is very easy and economic.

TECHNICAL SPECIFICATIONS (23°C, 50% relative humidity)

· Density A comp. (25°C, g/mL): 1,25 ± 0,10
· Viscosity A comp. (25°C, mPa.s): 1000 – 3000
· Solid content (% Weight): 67 ± 2
· Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3
· Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm²
· Permeability to water vapour (m): SD ≤ 5 CLASS I
· Pot life (23°C): 5 – 6 Hours
· Solvent: Organic solvent

Documents of the ProductDOCUMENTS OF THE PRODUCT

· In pools, water tanks, water reservoir, purification and balance tanks,

· In metal tanks and water cisterns,

· In ornamental ponds, ponds, dams, water channels,

· On concrete, plaster, and screed.

Surface preparation : The surface to be coated must be clean, dry and all impurities that can affect the adhesion like dirt, oil, loose paint or foreign material must be cleaned. Surface repairs, cracks, and gaps should be repaired with ISONEM M 03 Elastic Repair Mortar. Before application of ISONEM Pool, in concrete, marble, granite, raw wood, tile, ceramic etc. surfaces, ISONEM EP Primer should be used as a primer with 0,250 – 0,400 kg/m² consumption. In steel/metal surfaces, the surfaced should be primed with ISONEM Anti Rust Primer (Anticorrosive primer), consumption of 0,250 – 0,350 kg/m².

Preparation of the mixing : To prepare ISONEM POOL for use, first stir the contents of the A Component (Paint) and then add the contents of the B Component (Hardener) and mix homogeneously for 3 – 4 minutes to ensure thorough mixing.

Application method : It should be applied with a brush, roller or appropriate spray and left to dry. The second layer should be applied after the first coat is dried, in 24 hours. The prepared mixture should be consumed in 5 – 6 hours. After the application, the pool should be left to curing 10 days, before filling water.

CONSUMPTION: 1 kg/m² (two layers) |  min. 4,5 m² /set (two layers)

COLOR: Blue. You can consult our company for other color demands.

PACKAGING: 4,5 kg set (Component A: 4 kg paint, Component B: 0,5 kg hardener)

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITIONS: Store tightly closed in a dry and cool place away from heat and fire.