I Need More Information

Our team will be in touch as soon as possible to discuss your needs.

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

SB SUPER COMPONENT

Special Mineral Filled Waterproofing

ISONEM SB SUPER COMPONENT, It is a highly resistant insulating coating with strong adhesion, excellent water resistance and UV resistance, consisting of a special mineral filler and polymer components. ISONEM SB SUPER COMPONENT does not wear due to its structure, unlike other insulation materials. Therefore, it is very suitable for use on concrete roofs, terraces, walkways, asphalt pavements, tennis courts, and sports areas. The product is not affected by UV, snow, rain, water. If required, all kinds of ceramic, marble and similar coating can be applied on it. Economical and long lasting. No harm to human health.

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL) : 1,40 ± 0,10
pH (25°C) : 7.0 – 9.0
Viscosity (25°C, mPa.s) : 13000 – 14000
Solid content (% Weight) : 74 ± 2
Water transmission rate (kg/ m2. h0,5) : < 0,1 CLASS W3
Adhesion strength by pull-off test (N/mm2) : Crack bridging flexible systems without trafficking ≥ 0.8, with trafficking 1.5 N/mm²
Permeability to water vapour (m) : 5 ≤  SD ≤ 50 CLASS II
Solvent : Water
Documents of the ProductDocuments of the Product

CE CERTIFICATE
ISO CERTIFICATE
TSE CERTIFICATE

Color Scheme (Color Tones may vary due to resolution and light differences)

123-ОР-06-2020 The decision that the products are not subject to the requirements of the “Technical Regulation on Fire Safety Requirements”Certificate of State Registration of Products (SGR)

TDS (EN) – ISONEM SB SUPER COMPONENT
SDS (EN) – ISONEM SB SUPER COMPONENT

· Concrete terrace and roof insulation,

· Wet area insulation

· Concrete roads, parks, and gardens

. Hidden gutters, gutter-tile, and soffit.

Surface preparation: Firstly the application surface is cleaned from dust, dirt and oil. If there are places that require repairing, it is repaired with ISONEM M 03 Elastıc Repair Mortar or ISONEM MS Mortar Repair Mortar. Before application, absorbent substrates should be primed with the ISONEM UNIVERSAL PRIMER (1: 7 diluted with water; 1 part primer, 7 parts water). The primer application should be after a minimum drying time of 4 hours.

Application method: ISONEM SB SUPER COMPONENT is a super component ready to use.The product is mixed homogeneously with the help of a mixer in the bucket for 5 minutes. After the mixture is made ready, ISONEM SB SUPER COMPONENT is applied to the surface in two coats and perpendicular layers to each other. It should be waited minimum of 4 hours between the coats. The product is produced in two types as “summer” and “winter” in accordance with the climate conditions and air temperature to be applied. The summer product is suitable for applications between 18 – 40 ° C and the winter product at 5 – 17 ° C.

PACKING: 5 kg, 10 kg and 18 kg PP in buckets

CONSUMPTION: 1 kg/m² (2 layers application)

5 kg: min. 5 m²/bucket (two layers application)

10 kg: min. 10 m²/bucket (two layers application)

18 kg: min. 18 m²/bucket (two layers application)

COLOR: All requested can be produced in colors.

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITIONS: Store tightly closed in a dry and cool place.

Your Content Goes Here